Nitrogen generator Nitrogen 1000

Dimensions (cm): 210 x 110 x 300

Weight (kg): 2800

Power requirements : 110 - 240 VAC / 50 Hz - 200 W

nitrogen flow : up to 430.35 m3 / h depending on the compressed air pressure and required nitrogen purity

Nitrogen purity : 95% to 99.999%

Compressed air pressure : 6.5 to 10 bar (g)

nitrogen pressure : up to 9 bar (g)

Nitrogen generator Nitrogen 1000

Nitrogen generators Sysadvance NitroGEN-- models (NG50-NG3600)

The range of tower models of PSA nitrogen generators is aimed at users who want to cover the highest nitrogen consumption, on the order of tens to hundreds of Nm3 / h. Tower models are supplied without a machine cover, so the models are available at the lowest possible price. For the production of nitrogen, production towers based on pressure vessels are used, but with flat top lids, which make it possible to prevent the movement of the molecular sieve and to contribute to a long life without maintenance and constant performance without long-term decline. Generators in this category are equipped with air and nitrogen pressure measurement as standard and are controlled by an Omron PLC. The valve system with two opposing pairs of valves enables a balanced flow. To maximize production efficiency, NG1000 and larger models use different molecular sieves for low and high purity, further reducing nitrogen production costs.

Main advantages of NitroGEN generators

Low air factor = low air consumption

Nitrogen generators only use excellent molecular sieves that ensure the most efficient nitrogen removal. With a purity of 99.99%, only 4.45 Nm3 of compressed air are required to generate 1 Nm3 of nitrogen. This number is directly related to the production costs of nitrogen and has a significant impact on the operating costs while the generator is in use.

Save when installing with large models

Nitrogen generator models are in no way limited by production capacity. It is therefore not necessary to install several smaller generators, just one larger device. In addition, generators with outputs in the order of 50 Nm3 / h are designed as individual output models and are precisely "manufactured to measure the required nitrogen consumption".

Reduce operating costs by up to 20%

Thanks to the condensation dryer The molecular sieves used in nitrogen generators are extremely durable and enable the use of compressed air, which has been dehumidified by a conventional condensation dryer to a pressure dew point of +3 ° C, instead of an adsorption dryer. An adsorption dryer is many times more expensive than a condensation dryer and also normally uses around 20% of the inlet air for the regeneration of production towers, which increases the demands on the size of the compressor and, in particular, on the price of the nitrogen produced

10 year guarantee on the generator power

We are the only one on the market to grant a 10-year guarantee on the performance of the generator thanks to a high-quality molecular sieve and a special design. The production columns are equipped with flat lids that make it possible to compress the molecular sieve during production so that the sieve granulate does not wear, create voids and reduce performance during operation.

Economical VARIO PSA system

Sysadvance was the first company on the market to introduce the VARIO PSA energy saving system in 2015. The production of nitrogen by a generator mainly depends on two factors - the air flow and the time the air is in contact with the molecular sieve. Both coefficients are fixed in conventional PSA generators. If the nitrogen consumption is lower, it will be produced in higher purity, which leads to unnecessary increases in air consumption. The new VARIO PSA system makes it possible to variably change the delivered quantity by the corresponding purity and to save considerable air consumption in times when less nitrogen is required.

Minimal maintenance

Maintenance of nitrogen generators is practically non-existent. All maintenance work is limited to checking for cleanliness, flow and tightness every 6 months. The molecular sieve is of extremely high quality and there is no loss and need to change or add it in connection with the construction of production columns with flat lids. The nitrogen generators only have ASCO or SMC brand valves with a service life of millions of duty cycles, i.e. H. about 10 years

Privacy preferences
We use cookies to enhance your visit of this website, analyze its performance and collect data about its usage. We may use third-party tools and services to do so and collected data may get transmitted to partners in the EU, USA or other countries. By clicking on 'Accept all cookies' you declare your consent with this processing. You may find detailed information or adjust your preferences below.

Privacy declaration

Show details

Login